Yamaha yfz 450 cam mod question

[GNRfr3ak]

with the cam mod you move the cam 1 tooth clock wise?

[GNRfr3ak]

like 1 tooth towards the inlet right?

[NYMXer]

You retard the exhaust cam timing 1 tooth. I'm not sure but I think you move the cam counter clockwise.

[GNRfr3ak]

do you know where i can find out?

[jayh300]

do you know where i can find out?

hey dude... go in to the yzf450 forum, at the top there is a sticky with common threads, in that is the decomp mod.

[NYMXer]

OK brutha..............here you go

http://www.allthingsmoto.com/forums/f-183/how-daddog-cam-mod-w-videos-12298/

Click on the link and watch the video on how to do the cam mod. There are also printable directions to do the mod. Don't be afraid, it's easy if you follow the directions and take your time.

[GNRfr3ak]

thanks again

[GNRfr3ak]

the cam mod... you move the exhaust cam 1 tooth clockwise so 1 tooth towards the inlet cam... just incase any1 else wants to know

[Mutu]

the cam mod... you move the exhaust cam 1 tooth clockwise so 1 tooth towards the inlet cam... just incase any1 else wants to know

I did one the other day for a mate. No reshim needed either. Starts just the same. much more agressive mid.

Have you done yours yet?

[GNRfr3ak]

yeh did it...

it runs good more agressive ...did it by the video... they turned it 1 tooth clockwise...

so did i...

[Mutu]

Yep, sorry brain fart.

Good to hear!

[GNRfr3ak]

yeh... did the cam mod on my mates yfz450... and he cam of the same day... broke his collerbone...

thanks for all of ya help...

[TexasTea]

Will this cam mod work on the 07 YFZ450's?

Also, does it work on new HotCams?

I cannot find any specs on the stock cams to see if the lobe center has been changed on the HotCams.

[HighProCam]

Ok, heres all you need to know.....

Spy photos here

[TexasTea]

Got it, thanks!