Jump to content

Hitting rev limiter to early? HELP?


Recommended Posts

early fall last year i had the crank assembly replaced on my 05 450x and rode her 5 times with no problems but on the very start of the 6th ride she was hitting "and im guessing the rev limiter" way to soon. I would say its hitting the limiter 50% sooner than it should in every gear

she still starts fairly easy and idles fine with good power at begining of each gear but after the 40% mark she starts to backfire a little and feels like it's hitting the rev limiter?

any Ideas?

Thanks?

Link to comment
Share on other sites

Ok well it wasn't the carb so from what ive read on some other threads im thinking its a bad cdi, so my question is will my friend's 2006 cfr450 R cdi work on my 05 crf450 X to test and see if this will correct my problem?

Thanks?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...