CR250R 2002 CR250 - fresh-up-to-date plastic ....?

[sir speedy]

Besides full Polysport kit.....What year front fender and number plate (newer stuff) will work on the 2002 CR250 ?

I thought I had heard that 2018 fender/plate combo might work....

New to 2002 CR250. Thanks. Jimmy ?

[Into the sunset]

The last gen CR’s have nice lines stock. A tasteful improvement would be a 04-07 front fender as they are sharper. At 20 years old any “updated” plastic kits are not really going to make your bike look like a modern bike.
I suggest you put new OEM style plastic add a seat cover and graphics and enjoy a classic dirt bike. 
If you really want to modernize your bike go to the Gas Gas dealer and pick up a new 250 two stroke. They have traditional Honda colors and are completely up to date. 

[JJRace]

There are complete update kits to look like the 20 model CRFs out there. 

Alternatively, if you want to just update the front, get a cycra front # plate from a 13+ CRF (because they can just zip tie these onto the forks and bars) and the get the same year front fender.  you will have to drill 2 holes to mount to the lower clamp. 

Also cycra has in the past a rear powerflow fender to help intake into the airbox and has in the past had radiator shrouds.  nothing different looking, but increase cooling and intake. 

[sir speedy]

Thanks Fellas.

[HRC27]

You can get a restyle bracket from Pryme MX then run a '10 to '20 front end on your '02 CR250. Just run the same numberplate as fender. The pic is of my '12 CRF250X with a '19 CRF front plastics (Acerbis).

The bracket takes care of the top mounts and, on the '19 the bottom plugs into the fender. Comes with a template for re drilling the front fender. I had to change my top triple clamp and remove the X mounts from the bottom clamp. No big deal.

It'll be a direct bolt up for you.

https://www.prymemx.com/products/hondarestyle

Edited June 23, 2021 by HRC27