2020 Sherco 300 SEF steering stabilizer

[Chiespet]

I reached out to Scotts to see if they offer a stabilizer mount kit for this bike. They haven't developed any kits for it and have never taken required measurements to do so.

I was curious if anyone has found a kit that interchanges onto the Sherco?

[George @ Precision Racing]

We have a kit that is interchangeable with the Sherco.  It is not on the website yet. 

See what makes the Parabolic better

https://precision-rp.com/Why-is-the-Parabolic-better_ep_43-1.html

Use this link 

https://precision-rp.com/Parabolic-1-18-bar-complete-KTMHusq-non-rubber-coned-triple-clamps_p_295.html

 

[Chiespet]

That is intriguing! I looked it up on your website and it will also fit my KTM. There are questions about handlebar position for this. Do the handlebar positions for a KTM coincide with the positions on a Sherco or do I need to adjust?

Thanks, Frank

[George @ Precision Racing]

15 hours ago, Chiespet said:

That is intriguing! I looked it up on your website and it will also fit my KTM. There are questions about handlebar position for this. Do the handlebar positions for a KTM coincide with the positions on a Sherco or do I need to adjust?

Thanks, Frank

Thanks!   The standard Position (#2) on both the Sherco and KTM use the same Parabolic linkage. The other positions are very likely the same, but have not been confirmed. 

[DEL107]

On 5/12/2021 at 6:47 AM, George @ Precision Racing said:

We have a kit that is interchangeable with the Sherco.  It is not on the website yet. 

See what makes the Parabolic better

https://precision-rp.com/Why-is-the-Parabolic-better_ep_43-1.html

Use this link 

https://precision-rp.com/Parabolic-1-18-bar-complete-KTMHusq-non-rubber-coned-triple-clamps_p_295.html

 

Glad to see this available and will try one soon. Can you post this in the Sherco section? 

[George @ Precision Racing]

We finally put the Sherco Parabolic steering dampers on the website.

 

https://precision-rp.com/product.asp?itemid=394

 

[Eric72]

There is a sherco section that you might want to pose this question too. You might get more responses from sherco owners