Universal

Products
Products > Engine > Cylinder Kits > Cylinders & Kits > S&S Cycle Forged Piston Kit (80ci.) - Standard Bore 3 1/2in.,8:1 Low Compression (106-5511)
veh3 VEHICLE SPECIFIC ITEM ENTER YOUR VEHICLE

S&S Cycle Forged Piston Kit (80ci.) - Standard Bore 3 1/2in.,8:1 Low Compression (106-5511)


Facebook Twitter

SKU: 106-5511
ONLINE PRICE: $289.95





DESCRIPTION

Replacement pistons available for stock 74in., 80in. and 35/8in. big-bore applications All pistons kits come with two pistons, rings, wrist pins, and wrist pin keepers Compression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&S Requires the use of connecting rods with a rod length of 7.440in.(standard length OEM #24281-74A connecting rods); use of earlier connecting rods with a rod length of 7.470in. (OEM #24281-41A) will result in a slight increase in the compression ratio of about 1/2 point, and may also result in clearance problems (check all piston to cylinder head clearances carefully when using the early style rods) FORGED LOW COMPRESSION PISTONS, FOR 80in. STOCK MOTORS WITH 31/2in. BORE AND 41/4in. STROKE (8:1 C.R.)

VEHICLES

This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.