Universal

Products
Products > Engine > Valve Train > Camshafts > S&S Cycle 510C Chain Drive Camshaft Kit (33-5182)
veh3 VEHICLE SPECIFIC ITEM ENTER YOUR VEHICLE

S&S Cycle 510C Chain Drive Camshaft Kit (33-5182)


Facebook Twitter

SKU: 33-5182
ONLINE PRICE: $314.95





DESCRIPTION

Designed as a bolt in cam for 88in., 95in., and 96in. engines with compression ratios below 9.7:1. Intended primarily for stock heads that have not been ported. As quiet as stock but produces significant power increases across the RPM range, especially above 3000 RPM Compatible with the stock splined chain sprocket used in 00-06 Twin Cam (exc. 2006 Dyna) engines, but may be used in 1999 engines if the H-D 00-04 style splined rear cam sprocket is used Intake Opening (degrees): 20 Intake Closing (degrees): 38 Exhaust Opening (degrees): 52 Exhaust Closing (degrees): 20 Intake Duration (degrees): 238 Exhaust Duration (degrees): 252 Intake Lift (in): .510 Exhaust Lift (in): .510 Intake Lift at TDC (in): .187 Exhaust Lift at TDC (in): .179 Since 510C cams are used with the stock chain cam drive system, they are recommended for use with cylinder heads with stock valve springs or performance valve springs with no more than 160 lbs. of seat force. For more demanding applications we recommend the S&S gear drive cams.

VEHICLES

This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.