Universal

Products
Products > Body > Accessory Mounts > RAM Mounts RAM Fork Stem Motorcycle Base with Double Socket Arm and Diamond Base Adapter (RAM-B-176)
veh3 VEHICLE SPECIFIC ITEM ENTER YOUR VEHICLE

RAM Mounts RAM Fork Stem Motorcycle Base with Double Socket Arm and Diamond Base Adapter (RAM-B-176)


Facebook Twitter

SKU: RAM-B-176
ONLINE PRICE: $36.05

RETAIL: $37.95
YOU SAVE: $1.90 (5%)




DESCRIPTION

The RAM-B-176 consists of a fork stem motorcycle base, double socket arm and diamond base adapter. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1in. diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or 0.5in.-1.10in. at the following intervals: 12mm (0.5in.) 14mm (0.55in.) 16mm (0.63in.) 18mm (0.71in.) 20mm (0.79in.) 28mm (1.10in.) Note: Certain motorcycles require adding electrical tape to the area of the plug that is the largest diameter until it fits snugly in the stem.

VEHICLES

This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.