Universal

Products
Products > Brake > Brake Lines > Front Brake Lines > Magnum Sterling Chromite II Designer Series Front Upper Brake Line - 7/16in., 35deg. Banjo - 29in. (37929)
veh3 VEHICLE SPECIFIC ITEM ENTER YOUR VEHICLE

Magnum Sterling Chromite II Designer Series Front Upper Brake Line - 7/16in., 35deg. Banjo - 29in. (37929)


Facebook Twitter

SKU: 37929
ONLINE PRICE: $53.06

RETAIL: $58.95
YOU SAVE: $5.89 (10%)




DESCRIPTION

The industrys best braid Sterling Chromite II uses patented technology to look like chrome Crystal clear outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor All fittings are polished and chrome or black chrome plated Inner PTFE tubing with 100% Kevlar coverage provides the ultimate in high performance by greatly reducing line expansion for excellent brake control and safety ratings All brazed construction eliminates leaks, alignment problems, and unattractive threaded manifold connections for a sleek appearance Non-ABS models utilize a superior two-piece design consisting of a direct fit lower assembly used in conjunction with alternative length upper lines joined together by AN -3 fittings for easy installation Exceeds all DOT FMVSS-106 Specifications Non-stock applications require taking a measurement for the upper brake line length and banjo angle to ensure correct fitment Non-ABS Modelsone upper and lower kit is requiredtwo kits per bike ABS Touring Modelsone upper, one mid-line and lower kit is neededthree kits per bike Made in the USA HOW TO ORDER: Lower lines are model specific. Use the chart to determine which line is required Non-ABS model lowers: The lower line connection to the upper brake line is at the lower triple tree Non-ABS model uppers: Upper line length is determined by measuring the routing path from the top of the lower triple tree to the master cylindersee diagram ABS model lowers: The lower line follows the frame up and then back to the ABS controller ABS model mid-line: A Designer ABS mid-line is required. The mid-line follows the frame from the ABS controller to the steering neck area. Hidden in the fairing or nacelle, an AN-3 fitting attaches to an Upper Designer line completing the connection to the master cylinder. The mid-line length is 49in.see diagram ABS model uppers: Using the 49in. mid-line length as a reference, you can determine the additional line length needed to complete the upper brake line routing to the master cylinder Stock fitments: Use the stock reference chart to determine what upper line length would be stock for your application. Please note: ABS and non-ABS stock lengths are different Alternative fitments: Due to handlebar changes, line length changes are accommodated with the UPPER line only. See chart for available lengths The stock reference chart also gives you the stock banjo angle used for the master cylinder. However, you may prefer to use a different banjo angle based on alternate routings or changes to the handlebars Dual Disc

VEHICLES

This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.