Products > Fuel & Air > Air Filters > Filters > K&N Engineering Universal Round Straight Air Filter - Rubber End Cap (RU-1470)
veh4 UNIVERSAL PRODUCT What does this mean?

K&N Engineering Universal Round Straight Air Filter - Rubber End Cap (RU-1470)

Facebook Twitter

SKU: RU-1470

RETAIL: $58.95
YOU SAVE: $5.89 (10%)


When selecting one of K&Ns universal round straight air filters, you should consider the following dimensions as they relate to the specification chart: Mounting Flange Inside Diameter - This is the most critical dimension and should be very close to the diameter of the applications inlet flange. The flange will stretch up to 1/8in. for those in between sizes. Filter Diameter - This is the overall diameter of the filter. Always use the largest diameter practical to insure maximum filtration. Filter Length - This dimension is the length of the filter body only, it does not include the flange length. Always use the longest filter practical for maximum filtration. Flange Angle and/or Length - If no angle is listed in the specifications table, the flange is straight. Any angle listed is in degrees and can be utilized when space is a problem. Flange Type - The location of the flange in relation to the O.D. of the filter is sometimes offset to one edge of the filter for more clearance in an application. K and N Universal Round Straight Sold Individually These filters are legal ONLY for racing vehicles. Not applicable, nor intended for use on emission controlled street or highway vehicles Mounting Flange Inside Diameter 2 3/4in. MM 70, Filter Outside Diameter 4in. MM 102, Filter Length 6in. MM 152, Flange Angle; Length 10deg.; 1in. Flange Type Angled
Stock photo shown, actual item may vary by model.

Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.