Products > Fuel & Air > Air Filters > Filters > K&N Engineering Universal Round Straight Air Filter - Rubber End Cap (RB-0910)

K&N Engineering Universal Round Straight Air Filter - Rubber End Cap (RB-0910)

Facebook Twitter

SKU: RB-0910

RETAIL: $57.95
YOU SAVE: $5.79 (10%)


When selecting one of K&Ns universal round straight air filters, you should consider the following dimensions as they relate to the specification chart: Mounting Flange Inside Diameter - This is the most critical dimension and should be very close to the diameter of the applications inlet flange. The flange will stretch up to 1/8in. for those in between sizes. Filter Diameter - This is the overall diameter of the filter. Always use the largest diameter practical to insure maximum filtration. Filter Length - This dimension is the length of the filter body only, it does not include the flange length. Always use the longest filter practical for maximum filtration. Flange Angle and/or Length - If no angle is listed in the specifications table, the flange is straight. Any angle listed is in degrees and can be utilized when space is a problem. Flange Type - The location of the flange in relation to the O.D. of the filter is sometimes offset to one edge of the filter for more clearance in an application. K and N Universal Round Straight Sold Individually These filters are legal ONLY for racing vehicles. Not applicable, nor intended for use on emission controlled street or highway vehicles Mounting Flange Inside Diameter 3in. MM 76, Filter Outside Diameter 4 1/2in., Filter Length 5in., Flange Angle; Length 5deg.; 1in. Flange Type Angled


This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.

Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.