Universal

Products
Products > Fuel & Air > Air Filters > Filters > K&N Engineering Universal Oval Air Filter - Rubber End Cap (RU-1530)
veh4 UNIVERSAL PRODUCT What does this mean?

K&N Engineering Universal Oval Air Filter - Rubber End Cap (RU-1530)


Facebook Twitter

SKU: RU-1530
ONLINE PRICE: $64.75

RETAIL: $71.95
YOU SAVE: $7.20 (10%)




DESCRIPTION

When selecting one of K&Ns universal oval air filters, you should consider the following dimensions as they relate to the specification chart: Mounting Flange Inside Diameter - This is the most critical dimension and should be very close to the diameter of the applications inlet flanges. The flanges will stretch up to 1/8 for those in between sizes. Filter Oval Dimensions - This is the length and width of the filter. Always use the largest filter practical to fit the application. Filter Length - This dimension is the length of the filter body only, it does not include the flange length. Always use the longest filter practical, for maximum filtration. Flange Angle and/or Length - If no angle is listed in the specifications table, the flange is straight. Any angle listed is in degrees and can be utilized when space is a problem. Flange Type - The location of the flange in relation to the outside of the filter is sometimes offset to one edge of the filter for more clearance. These filters are legal ONLY for racing vehicles. Not applicable, not intended for use on emission controlled street or highway vehicles. Mounting Flange Inside Diameter 2 3/4in. 70MM , Filter Outside Diameter 4in. x 6 1/4in. MM 102 x 159, Filter Length 5in. MM 127, Flange Angle; Length 10deg.; 1in. Flange Type Angled
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.