Products > Engine > Valve Train > Valve Springs > Feuling Econo Beehive Valve Springs - 7 Degrees - 5/16in Valve Stem and Stock Keeper Groove (1120)

Feuling Econo Beehive Valve Springs - 7 Degrees - 5/16in Valve Stem and Stock Keeper Groove (1120)

Facebook Twitter

SKU: 1120

RETAIL: $199.95
YOU SAVE: $20.00 (10%)


Made from premium stress-relieved conical ovate wire Feature extremely high level of fatigue life Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion Designed to handle the demands of performance engines with 585in. and smaller lift camshafts Available for 5/16in. and 7mm valves Kits include: Econo BeeHive valve springs, lightweight 7 steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring loaded valve stem wiper system Seat lbs./installed height; 183 lb. at 1.760in. (.510in. lift), 175 lbs. at 1.785in. (.535in. lift), 172 lbs. at 1.803in. (.553in. lift), 165 lbs. at 1.825in. (.574in. lift), 163 lbs. at 1.835in. (.585in. lift), 380 lb. at 1.250in. (open height) and coil bind at 1.180in. Dyno proven and track tested Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs Made in the USA Econo BeeHive kits are direct replacement with no machining or rocker box clearance required for cams up to .574in. lift for 84-04 Big Twin and 86-03 XL and up to .585 in. lift for 05-13 Twin Cam.


This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.

Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.