Universal

Products
Products > Engine > Valve Train > Camshafts > Crane Cams H304-2 Hydraulic Performance Hi Roller Cams (1-1005)
veh3 VEHICLE SPECIFIC ITEM ENTER YOUR VEHICLE

Crane Cams H304-2 Hydraulic Performance Hi Roller Cams (1-1005)


Facebook Twitter

SKU: 1-1005
ONLINE PRICE: $206.95

RETAIL: $229.95
YOU SAVE: $23.00 (10%)




DESCRIPTION

Produces strong low-end and mid-range power Engine must have higher-than-stock compression ratio or increased displacement up to 88 cu. in. Works best in modified engines with headwork performed Revolutionary cam design for 84-99 80in. Evolution only has Multi-Index Gears to offer the versatility of three cam timing settings with one camshaft. One position gives a 4 degree advance of usual cam timing and another position is 4 degree retarded of the original timing. An overall 8 degree timing range is available Produces a wide power range in your Evolution Engine must have at least 10:1 compression ratio Good cam for strokers and motors with up to 95 cu. in. Modified heads and high-lift springs required Intake Opening (degrees): 24 Intake Closing (degrees): 50 Exhaust Opening (degrees): 55 Exhaust Closing (degrees): 25 Intake Duration (degrees): 254 Exhaust Duration (degrees): 260 Intake Lift (in): .600 Exhaust Lift (in): .600 Intake Lift at TDC (in): .205 Exhaust Lift at TDC (in): .203

VEHICLES

This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.