Universal

Products
Products > Engine > Valve Train > Camshafts > Andrews 67HG Gear Drive Camshafts (216367G)
veh3 VEHICLE SPECIFIC ITEM ENTER YOUR VEHICLE

Andrews 67HG Gear Drive Camshafts (216367G)


Facebook Twitter

SKU: 216367G
ONLINE PRICE: $303.26

RETAIL: $336.95
YOU SAVE: $33.69 (10%)




DESCRIPTION

Gear drive uses less engine power to operate and improves valve timing accuracy over stock chain drive camshafts Dynamometer comparisons show gains of 4 horsepower over chain drive camshafts Can be installed on both carbureted and fuel injected models (exc. 2006 Dyna) Hi-lift springs Performance cams for 95-107+ inches, 10.0 to 10.8 C.R. with high flow head setup. (2600-6400+ RPM) NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance NOTE: Sold as cams only, inner and outer gear kit and installation kit must be purchased separately NOTE: Requires spring spacing Intake Opening (degrees): 24 Intake Closing (degrees): 48 Exhaust Opening (degrees): 58 Exhaust Closing (degrees): 22 Intake Duration (degrees): 252 Exhaust Duration (degrees): 260 Intake Lift (in): .570 Exhaust Lift (in): .570

VEHICLES

This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.


Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.