HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
gal

NEED YOUR HELP ON FLYWHEEL QUESTION

4 posts in this topic

HI JUST GOT THE 12oz FLYWHEEL WEIGHT FROM TERRYCABLE, AND BEFORE I INSTALL IT NEED UR HELP PLEASE:

1 DOES THE WEIGHT GO ON THE FRONT OR THE BACK OF THE FLYWHEEL?

2 WHERE DO I PUT THE 2 DOWEL SPACERS TO LINE UP THE CASE?

3 DO I REALY NEED THE CASE EXTENDER AND IF YES DO I NEED TO BENT THE SHIFTER?

PLEASE ANSWER FAST AS I WANT TO INSTALL IT TODAY....

Share this post


Link to post
Share on other sites
Originally posted by gal:

HI JUST GOT THE 12oz FLYWHEEL WEIGHT FROM TERRYCABLE, AND BEFORE I INSTALL IT NEED UR HELP PLEASE:

1 DOES THE WEIGHT GO ON THE FRONT OR THE BACK OF THE FLYWHEEL?

2 WHERE DO I PUT THE 2 DOWEL SPACERS TO LINE UP THE CASE?

3 DO I REALY NEED THE CASE EXTENDER AND IF YES DO I NEED TO BENT THE SHIFTER?

PLEASE ANSWER FAST AS I WANT TO INSTALL IT TODAY....

(1)The weight installs on the front of the flywheel.

(2)Remove the stock spacers and replace with the new longer ones.

(3)Yes you need the case extender. You may not need to rebend your shift lever depending how much clearance you end up with.

Not to be a smart ass here but if you need to ask these type of questions you may want to seriously think about having someone more experienced install your kit for you.

Share this post


Link to post
Share on other sites

SSchultz

hi there i never did it before and want to b sure of what im doing...

im not a mechanic ( just a fx trader) but ill give it a try anyway

Share this post


Link to post
Share on other sites

Gal,

Make sure you use a drill press when drilling the new holes in your flywheel. If you don't drill the holes absolutely straight you enlarge the hole, reducing thread contact. Use plenty of loc-tite on the new bolts also.

Mike

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0