HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
RayCharles

Countershaft sprocket is the real deal(and other assorted thoughts)

4 posts in this topic

Hey, moved the 15 tooth to a 14 tooth on my DRZ400S tonight and just wanted to comment that the nut was in fact terrifyingly loose, and any new owners (such as myself) should definitely heed the loctite warning. The nut itself came off with a little bit of applied pressure and a handheld wrench. No impact gun, no breaker bar, no holding the rear brake. Additionally, if any of you are curious the 14 tooth sprocket actually comes in handy from what I can tell so far. It makes 3rd a useable around town cruising gear (it was pretty luggy for me originally and I would often have to swap between 2nd and 3rd riding through town). Oh also it makes the front end jump up pretty quick, if thats what youre looking for.

While Im at it, I set my chain sag with the kickstand down and the bike on the floor @ 1.5-2 inches like I read elsewhere on the forum, is this normal for the rest of you?

Share this post


Link to post
Share on other sites

I use 3 fingers between the chain and Behind the swingarm buffer , at the chains tightest point

Share this post


Link to post
Share on other sites

yeah i just realized i have been running mine too tight. looked okay sitting in the garage on the kickstand, but when i sat on it and the swing arm levels out a bit the distance between the front and rear sprockets increases and tightens the chain up really tight. so its always good to check it with the suspension loaded to make sure its not super tight while at ride hight.

Share this post


Link to post
Share on other sites

yeah i just realized i have been running mine too tight. looked okay sitting in the garage on the kickstand, but when i sat on it and the swing arm levels out a bit the distance between the front and rear sprockets increases and tightens the chain up really tight. so its always good to check it with the suspension loaded to make sure its not super tight while at ride hight.

Agreed. After I posted this I checked it again under full load and it was still binding so I let it out one more notch. Its riding nicely now!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0