yz426 cylinder head resurfaced

I resurfaced my cylinder heads at the machine shop at my local community college because they were warped. I took .008" off the second picture and .006" off the first picture. My question is can I take more off the second head because

its sill warped past service specs. how do I upload the pictures?
how do I upload the pictures?

You have to post the pictures to a hosting site such as Flickr or Photobucket, then kink them here. The services are usually free.

these are the links to the pictures.

SU1BRzAwNjkuanBn.jpg

SU1BRzAwODAuanBn.jpg

Edited by grayracer513
reformat IMG links

If you have your old head gasket, I'd bolt it up with some clay on the piston, install the cams and turn it over a time or two, then pull it off and check the valve to piston clearance. .014" is quite a bit, and I'm not sure what the resurfacing limit is.

They are two different heads. I only took .006 off the first head and .008 off the second head.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now