Sign in to follow this  
Followers 0
pablo45

Help identify my exhaust

11 posts in this topic

I just purchased a 2000 YZ426F and need help identifying the exhaust. I was told it is an older Pro-Circuit T4 exhaust. However, the badge is gone and I cannot find any markings on it. The canister is 3.5" in diameter. It is very loud and I would like to get a quiet tip, spark arrestor and new end cap (if needed). Any help identifying the exhaust and correct parts would be appreciated.

Pablo45

Link to pictures is here:

https://picasaweb.google.com/scienceguy4/Mar22011?authkey=Gv1sRgCK2e_bqP38b-5wE&feat=directlink

Share this post


Link to post
Share on other sites

It could be one of the early T-4's, hard to tell. The exhaust outlet looks too big to me. I think it looks more like one of the old white brothers R4 silencers, but like I said it's really hard to tell. Pro circuit silencers often have their name stamped into the front of the silencer where the midpipe meets the can, though I'm not sure if they all have that.

Share this post


Link to post
Share on other sites

I have a project 426 in the garage, when I get home I'll try to remember to snap some photos for comparison. It has the PC T4 on it.

Share this post


Link to post
Share on other sites
It could be one of the early T-4's, hard to tell. The exhaust outlet looks too big to me. I think it looks more like one of the old white brothers R4 silencers, but like I said it's really hard to tell. Pro circuit silencers often have their name stamped into the front of the silencer where the midpipe meets the can, though I'm not sure if they all have that.

Looks like an old R4 to me, too. If so, loud is only the beginning. You'll have to fab something for that, or suck it up and buy something else to put on it.

Share this post


Link to post
Share on other sites

It's not the PC T4, the one I have does not have the springs at the mid pipe to can connection. I'm with grayracer and KJ790 on this one.

Share this post


Link to post
Share on other sites

Looking around on the net it does seem to be an older model Pro-Circuit T-4 Tunable exhaust. I added a picture of that exhaust with the others for comparison. It looks the same including the two rivets that held on the name plate. Thanks for all the replies.

https://picasaweb.google.com/scienceguy4/Mar22011?authkey=Gv1sRgCK2e_bqP38b-5wE&feat=directlink

Share this post


Link to post
Share on other sites

Could be either the pro circuit , or white bros, or a DSP. The pro circuit tips fit on all of them and were offered in different sizes. I used to work for DSP and we tested and played around with the different tips 10 years ago.

Share this post


Link to post
Share on other sites

between the time on that pipe and the outlet size that thing looks like and ear splitter

If you could find a low hour used stocker on ebay even that would make your bike sound and probably run better.

I know people replace the OEM pipes all the time, but I find the stock YZ silencers to be just fine. And as far as quality not too many aftermarket pipes match the same quality as stock pipes

They look cooler till the mid pipes rust or the weld beads rust through

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0