Spring Rates for 2001 YZ426

What is the stock pring rate for the 01 YZ426. I read in one of the mags they were .46 and 5.4. I tried to find it in the manual no luck. I next check of the tuners sites. They claimed .47 and 5.4 for the '00 YZ426.

Thanks,

------------------

Rick

01 YZ426F #85 Vet C

I can only tell you that from what I have read all YZ426's have .46 & 5.4 I took a big chance here, one mag. said Yamaha part #5GR-23141-00 was a .47 the guys at my Yamaha didn't even know! Anyway I bought them ($50ea) & they seem to be stiffer. I won't know for sure till I sort out my seal problem & go to an outdoor track. These indoor tracks are too tight for big jumps!

Thanks for the info Clod Thrower. You would think it would be in the manual. Let me know how they work out.

Thanks

------------------

Rick

01 YZ426F #85 Vet C

[This message has been edited by forloop (edited 02-20-2001).]

Hey guys, I can't comment on the 01 manual listing the spring rates, but my 00 manual list them in the maint specs section under chassis as fork= .46kg/mm and shock= 5.4kg/mm

MXA's report on the 01 lists the same specs on the newer 426 also. Hope this helps.

Thanks dirtdad,

They are in the same place in the 01 manual. I missed them when I looked.

.46 and 5.4 for the 01 too.

------------------

Rick

01 YZ426F #85 Vet C

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now