HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
kjeanne

Wiring diagram for Honda xr or CRF 50cc

5 posts in this topic

Hi,

We bought a used Honda 50cc dirtbike today off of craigslist for my son. Turned out to appear as if it were a project and there is no clear understanding of what we have but we believe it is a CRF 50CC motor. We believe there is a CDI missing and ignition coil missing but would like to get the wiring diagram for this bike.

Does anybody have one on hand they can share with us to somehow finish this project? Greatly appreciated. We have come to understand there is not much difference at all between an XR50 and CRF50 but we are quite clueless here and don't know what to call it.

I can provide an e-mail address if there is someone that can help by sending a wiring diagram.

Thanks

Share this post


Link to post
Share on other sites

XR50wiringdiagram-1.jpg

If you post up the engine serial number, I can tell you what year engine it is. It should start with AE03E-*******

Share this post


Link to post
Share on other sites

Hi,

Thank you so much for your time and effort!!

There are 2 rows of numbers on the engine neither of which start with the the number/letters you mention. It goes like this -

YG139FMB

04090845

Also, on the diagram you provide, there were only 2 wires coming out of the engine. Yet, there are 5 wires coming out of the engine that we have here. The wires are:

green, yellow, white, black with red stripe, Blue with white stripe.

The seller mentioned the engine was a 70cc on a 50 frame. But we felt that was in question because the casting on the cylinder said 49ML which led us to believe it was a 50cc engine. Not sure if this makes any sense. We are thinking we are wrong in our assumptions or maybe this is a chinese copy engine? We can not find any info on this on the internet. The engine number does not come up.

Thanks again, hopefully we will find out what's going on here!

Share this post


Link to post
Share on other sites
Hi,

Thank you so much for your time and effort!!

There are 2 rows of numbers on the engine neither of which start with the the number/letters you mention. It goes like this -

YG139FMB

04090845 It is a Chinese-clone engine, the 39 in the engine number usually indicates that it is a 39mm bore which is 49cc.Also, on the diagram you provide, there were only 2 wires coming out of the engine. Yet, there are 5 wires coming out of the engine that we have here. The wires are:

green, yellow, white, black with red stripe, Blue with white stripe.

You will only need to use the black/red tracer and the blue/white tracer wires to make the engine work. You don't say if the bike itself is a genuine Honda or a Chinese clone. The green wire is an engine ground, the white and yellow are for lighting and charging the battery.The seller mentioned the engine was a 70cc on a 50 frame. But we felt that was in question because the casting on the cylinder said 49ML which led us to believe it was a 50cc engine. The Chinese-made Panterra pitbikes say 49ml on the cylinder, but actually are 47mm bore, which is 70cc.Not sure if this makes any sense. We are thinking we are wrong in our assumptions or maybe this is a chinese copy engine? We can not find any info on this on the internet. The engine number does not come up.

Thanks again, hopefully we will find out what's going on here!

Post up some clear pictures of the complete bike from a few different angles, to see what you're working with.

Share this post


Link to post
Share on other sites

WoW..that is alot of great information. Thanks so much for your help! At this point (thanks to you) we will go forward with finishing the build. We picked it up in pieces so it's not completed for pics. The ICM and the ignition coil is missing . We are trying to figure out how to connect the wires to a crf230 ICM we had laying around here. We have a good idea but can't check it until we get the ignition coil. I will post when all is in order and my 5 year old is having fun with it.

Thanks again,

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0