hot start kit

[Sandracer_uk]

anyone know who makes the handle bar mounted hot start kits?

[Shawn]

you can move yours for under $10. look for a post yz400 hotstart to bars. i also have a couple of pictures if you want.

shawn

------------------

99YZ400F (him)

00TTR125 (her)

[KasperMX]

the hot start kit you seek is made by Terrycable. For more info try www.whitebros.com or call them to order at

1-714-692-3404..Your welcome.

[This message has been edited by KasperMX (edited 01-14-2001).]

[This message has been edited by KasperMX (edited 01-14-2001).]

[KasperMX]

i messed up on the link so type it in yourself

[dirtdad]

you can also check directly with terrycable. www.terrycable.com

[Sandracer_uk]

shawn

sounds interesting, please cud post me the pics im at

innocenti70@hotmail.com

thanks

[Taffy]

sandracer

there's a few of us in anglia done the mod. do any enduro?

just put a £2 rubber tube up to your right handlebar, bolt the red button between the grip & the brake cylinder, put a bit more tube on the exit & plonk a bit of sponge down the middle. now put a bit of cloth over the entrance & use the wire clip to keep it all there! easy

total cost is £2

Taffy

[Sandracer_uk]

thanks taffy

i'm gonna go and buy some tube tomorrow and get that done

im based in warwickshire and have just sent the application off for my first enduro. cant wait. 25 feb down in milton keynes.

thanks again for the tip

[motoman393]

hey shawn could you send me a pic of what it looks like and how you did it! my email is: motoman393@hotmail.com

Thanks,

Garrett

------------------

I get my kicks on a 2001' YZ426!

Friendswood, TX

[jimt_yz400]

Shaun, I also want to take a look at it, so if you have a pic send it over.

Thx!!