Power switch relocation - 09 WR450F

For those that have pulled their headlights off and are running number plates, what have you done sith the power switch?

For the life of me I cannot fine a suitable location to mount it.

Any help would be appreciated.

John

For those that have pulled their headlights off and are running number plates, what have you done with the power switch

I often times switch from a number plate to a headlight and I left the main power switch in the stock location...but then again, I don't have the stock computer.

Hope this helps... :thumbsup:

I want to hide mine for security purpose.Dont know where?I just bought a baja kit and should buy a key switch..

Deserthound did a good job relocating the switch for the numberplate. This is how I mounted the BD style key switch. I just ran the kill switch wires to it.

IMG_0298.jpg

IMG_0302.jpg

Thanks for all of the replies.

I ended up mounting it at the base of the backside of the number plate. There is some flashing that runs between the two mount hole that is just wide enough. I fabbed up a plate to replace the mounting bracket so the unit would be sealed and then popped a few holes in the plastic to facilitate the wiring and longer screws. It's outta harms way and wouldn't know it's there unless you were told.

Would post pics if I could.

Thanks again, John

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now