HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
flyingboy

Need help choosing handlebars, please!

5 posts in this topic

Ok, I'm ready to ditch the stock bars already. I'm 6'3" on a 2001 WR426. I need advice from all the tall guys out there about which style bars you like the best, in the woods and on the MX track.

I've been through several catalogs and the choices seem endless. Scotts , Protapers without the crossbar, Renthal. I know I'll probably need a new triple clamp too.

Share this post


Link to post
Share on other sites

Take a look at the Applied Racing Wrap Oversize triple clamp and Pro taper CR-high bend bars. Lots o'room. Easy trans from sitting to standing.

------------------

It's your world, I just play in it!

'00WR, WB E-Series S-Bend w/7 discs, Stock header, throttle stop trimmed, airbox cover removed. Stock jetting. 4500ft.

Share this post


Link to post
Share on other sites

Glad I went with Pro-Tapers and a 2000 YZF top clamp. The Clamp is 10mm farther forward that the stock WR and the Pro-Taper mounting system raised the bars almost an inch upward. In addition, the bars are quite a bit more upwright than stock. Also, not having a crossbar is nice and clean. Really opens up the bike. You can't go wrong here.

[This message has been edited by Bryan Bosch (edited 03-31-2001).]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0