Homemade Dirt bike stuff!

[71_burton]

Well I thought this would be good for my 2000th post! WOOT WOOT!!!!!!!!!! ? :banana:

Anyway the point is to post all homemade dirtbike stuff.

Stands.

Parts.

Tools.

Anything dirtbike related that is homemade!

So get to posting!

[MotoMan40]

ill start this thread off

[71_burton]

Sweet!

[tafkaoe]

I fabricated this last Saturday, made from stock, no bought items.

[ncdirtrider249]

That trailer is so legit dude it's nice!

[RebelRider724]

sweet

[kawazooki_doc]

Sell those on ebay...I want one like that but the ones from a manufacture are so ridiculously priced.

[Wing Nut]

Looks good. I have a couple ideas to make it better. Add a place to put your gas can, incorporate a wheel chock for the front tire so you don't have to crank down the suspension, and add a bracket to store the ramp when not using it. Just suggestions, I'm not knocking it at all, just trying to help you make it better.

[yammy225ttr]

Skid plate was a real P.i.t.a. to shape, the 1/4" aluminum is a bit overkill. But it'll do the trick.

Brake Pedal tip made out of some 1"x 1/8" steel bar stock.

[joDer]

impressive!

[Rock Monster]

I have made so many things for my bike. Here are a few.

Here is a Vapor mount and dash setup that I fabbed out of 1/8" aluminum and a GPS mount made from the same stuff along with a GoPro helmet cam mount.

All of the diamond plate parts on the bike I made as well.

Custom front and rear flushmount blinkers.

I have a bunch more custom stuff but I will post that later.

[nastyrider17]

I have made so many things for my bike. Here are a few.

Here is a Vapor mount and dash setup that I fabbed out of 1/8" aluminum and a GPS mount made from the same stuff along with a GoPro helmet cam mount.

All of the diamond plate parts on the bike I made as well.

Custom front and rear flushmount blinkers.

I have a bunch more custom stuff but I will post that later.

That looks great. I really like those blinkers.

[71_burton]

This thread is gonna be great!

[o-lad]

oh i cant wait to see more

[JSV]

Frame Guards & header heatsheild

Radiator braces

Skid Plates

Bike Stand

Tire changing stand

Ramp

GPS Mount

[71_burton]

Hmm nice bike stand!

[yamaharider324]

stand I made from some old bed frames and some plywood plus a sheet of rubber for the top.

[71_burton]

Fellas you think a stand made from wood, would support a 85? Just wondering.

[JSanfilippo]

Fellas you think a stand made from wood, would support a 85? Just wondering.

Use 2X4

I've got a couple of wooden stands that'll probably support an XR 650L. I know they support a TT-R 250 and WR 450f no prob.

[71_burton]

Use 2X4

I've got a couple of wooden stands that'll probably support an XR 650L. I know they support a TT-R 250 and WR 450f no prob.

Fancy Dancy!