jetting size needed

Hi im new to this site i hope im in the proper thread . I just bought a used 02 drz400s it has a fmf exhaust and was jetted there is no 3x3 mod and i think I want one. my questions are. 1 Is it going to help much since there is already a high flow k&n air filter. 2. what size jet do i need if any? the guy gave me the jett kit so there are a bunch of extras i would appreciate any thoughts

Hi im new to this site i hope im in the proper thread . I just bought a used 02 drz400s it has a fmf exhaust and was jetted there is no 3x3 mod and i think I want one. my questions are. 1 Is it going to help much since there is already a high flow k&n air filter. 2. what size jet do i need if any? the guy gave me the jett kit so there are a bunch of extras i would appreciate any thoughts

Did you check the DRZ jetting database, and do a forum search ??:ride:

What is your elevation

Jbw

i did do a serch but i could not get any thing to come up. i ride at an altitude between 500 and a 1000 feet

Stay stock 142.5 main and 22.5 pilot with no 3x3

I would suggest to get a jet kit and do the 3x3 and jet accordingly.

I have a stock 07 s, any jetting suggestions? Bought a yosh rs2 full system and a dyno jet kit. I went with what yosh suggested as far as jetting, think they call for 145main and (50pilot????....not sure). THey also call for a cut out in the air box 3.65"x4.5". Does this sound too big, both cut out and jets? Just wanted to see what the experts have to say.

I have a stock 07 s, any jetting suggestions? Bought a yosh rs2 full system and a dyno jet kit. I went with what yosh suggested as far as jetting, think they call for 145main and (50pilot????....not sure). THey also call for a cut out in the air box 3.65"x4.5". Does this sound too big, both cut out and jets? Just wanted to see what the experts have to say.

I would stick with the 3x3 and use the 145 main and a 25 pilot and the 4th clip on the DJ needle. That should be dead on or very close. You can adjust from there.

correct me if I'm wrong but surely if he did what you have just suggested he would be looking at a 155 or 160 main jet depending on if the FMF was corked or not!

That would be correct with the JD kit (James Dean) but with the DJ (DynoJet or FMF) kit this would be the jetting.

Alright, so I took apart the carb and installed the fmf jet kit. I know I screwed something up. Going to finish install tomorrow, with the yosh full system. FMF kit came with a 134 main jet, said to go 3.5 turns on the fuel mixture screw, and put c clip on the 4 from the top. THis is where Im screwed, I think. On the needle I put, starting from the bottom, stock metal washer, plastic washer, and c clip. Does this sound like its in the right order? Is the jet size big enough? Should I ride it and see? And if I don't sound incompetent enough, which jet is the main jet??? LOL! Guess I have to learn somehow........or find a good mechanic in Chino!!! LOL!!! Look forward to hearing any advice. I think I'd rather bang my freakin head against the wall than take this damn carb out again!! haha........seriously!!

Alright, so I took apart the carb and installed the fmf jet kit. I know I screwed something up. Going to finish install tomorrow, with the yosh full system. FMF kit came with a 134 main jet, said to go 3.5 turns on the fuel mixture screw, and put c clip on the 4 from the top. THis is where Im screwed, I think. On the needle I put, starting from the bottom, stock metal washer, plastic washer, and c clip. Does this sound like its in the right order? Is the jet size big enough? Should I ride it and see? And if I don't sound incompetent enough, which jet is the main jet??? LOL! Guess I have to learn somehow........or find a good mechanic in Chino!!! LOL!!! Look forward to hearing any advice. I think I'd rather bang my freakin head against the wall than take this damn carb out again!! haha........seriously!!

Needle should be from the bottom -> Thick Washer -> Plastic Washer -> C-clip -> thin washer

Thanks for all the help guys. That video saved my ass!! The bike rips!!!! its awesome. Heres my set up,

full yosh rs2

snorkel out, no 3x3

smog crap out

134 main

stock 22.5 pilot and other jet

fuel screw 3.5 turns

so far so good! But theres always room for improvement, wink wink, open to suggestions. Ill let you know if it blows up or not!!! lol!!!

Thanks for all the help guys. That video saved my ass!! The bike rips!!!! its awesome. Heres my set up,

full yosh rs2

snorkel out, no 3x3

smog crap out

134 main

stock 22.5 pilot and other jet

fuel screw 3.5 turns

so far so good! But theres always room for improvement, wink wink, open to suggestions. Ill let you know if it blows up or not!!! lol!!!

cut the 3x3 hole and go with a 150,152.5 or a 155 main jet.

cut the 3x3 hole and go with a 150,152.5 or a 155 main jet.

Do you really think I get much more power out of the little bugger??

Have no idea, Im just curious. After watching the video above on how to jet, taking out the carb is no longer a pain in the ars!

the main jet is the one that is below the emulsion tube that the needle drops down into.

cut the 3x3 hole and go with a 150,152.5 or a 155 main jet.

Do you really think I get much more power out of the little bugger??

the amount of extra power is minimal but you will be able to feel it on the butt meter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now