right side crankcase drain bolt

[yz450fcranker]

ok i did it i over did the right side crankcase drain bolt by one notch i felt it go easy "loosen up" luckily i undid it at the same time checked the threads and cant say that anything went wrong so i threaded just to about where it should be and its fine should i just go on and ride

[USED YZ426F]

You might be able to get away with just riding it.

But, if you started to pull the threads out of the case, it is only a matter of time before it leaks. I would take the 10 minutes and fix it right.

A time-sert will work perfectly in that location and give you a permanent repair.

[yz450fcranker]

ive looked into timesert but dont know what to buy can you give me a link to the actual kit i need and explain on installation

[grayracer513]

I would take the 10 minutes and fix it right.

If it's an '06 or later, nobody's going to fix it in 10 minutes.

[USED YZ426F]

ive looked into timesert but dont know what to buy can you give me a link to the actual kit i need and explain on installation

http://www.timesert.com/

There are some videos showing how to install.