Just acquired a 2009 WR450. I weight approx 75kg without riding gear and having some issues with my suspension. I have managed to increase my preload on the shock to obtain a rider sag of around 101mm and static sag of around 37mm. Since i believe these values are within the acceptable range i suspect the standard rear shock spring must be OK for my weight. Unfortunately i seem to have a problem with my forks. They seem too soft. I tend to ride a lot of sand/whoops in a semi desert like environment. I believe under these conditions firmer suspension is preferred? My fork static sag is 35mm but my rider sag is 70mm. I believe that the rider sag is too high. Currently all my clicker settings for both shock and forks for both compression and damping are set as per the standard manual settings. I haven't played with these yet as i still don't seem to have the right fork rider sag. Can i improve my fork situation by increasing compression damping? or am i destined for a stiffer fork spring or can the problem be solved by altering the amount of oil in the fork. As i am a relatively inexperienced rider and new to this forum any help would be very gratefully appreciated. Thank you in advance for any help/suggestions offered.