Jump to content

Jet Setting Question


Recommended Posts

I just bought an 01' 426 and did the 450 auto decompression modification and it has a pro circuit T-4 exhaust system. Im not sure if its jetted right for my elevation which is between 4000-5000 ft. Im not sure if by changing the cam the jetting needs to be changed because the head pipe from the engine is glowing red after a couple minutes at idle.. Any help would be greatly appreciated as I am very anxious to ride this beast... THANKS!

Link to comment
Share on other sites

The cam mod will have no effect on jetting. Find one as near your altitude as possible, and adjust your jetting about 2% for each 2000 feet of difference (leaner if you are higher, richer if you are lower).

Then, read the rest of the jetting info in Common Threads, specifically, How to Confirm Your Pilot Setting, and the Guide to Jetting.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...