HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
tdtravis80

3x3 mod for Drz400s

11 posts in this topic

I am planning on doing the 3x3 mod for my 2000 Drz400s. I bought a FMF Power up jet kit off the world wide web but it says its for a mildly tuned machine using the stock airbox. It comes with main jets .132,.134,.136. If I do the 3x3 mod the airbox is not going to be stock any more right? is this the wrong jet kit for the 3x3 mod? I appreciate your imput

Share this post


Link to post
Share on other sites

yes, that would be the wroung kit. A 3x3 w/ stock pipe calls for a main jet 155 so you can see you are not even close. It has bin said many times before get the JD kit and you will be set JDS005

Share this post


Link to post
Share on other sites
I am planning on doing the 3x3 mod for my 2000 Drz400s. I bought a FMF Power up jet kit off the world wide web but it says its for a mildly tuned machine using the stock airbox. It comes with main jets .132,.134,.136. If I do the 3x3 mod the airbox is not going to be stock any more right? is this the wrong jet kit for the 3x3 mod? I appreciate your imput

that jet kit is made by dynojet(#3109) i believe and it was only ever marketed as a stage 1.our jetting expert eddie developed the stage 2 for that kit here a while back.

for the stage 2(3x3 airbox mod)you should also get the #25 pilot jet and the kientech s/s socket head float bowl screws.you won't necessarily need to buy extra main jets if using the stock exhaust. this will probably get you close;

3x3 airbox

stock 142.5 main jet

DJ slide spring

DJ needle

clip 4(with all stock spacers)

13mm float level

25 pilot jet

2 1/2-3 turns stock fuel screw

I'll see if i can dig up some pictorial how-to's for ya.

http://web.archive.org/web/20050309061208/drz.info/drz/

http://www.thumpertalk.com/forum/showthread.php?t=334539

Share this post


Link to post
Share on other sites

I should be able to use the needle I got with that kit and just buy the 142.5 main jet and the 25 pilot jet that i need on its own right. or should i return the kit if i can?

Share this post


Link to post
Share on other sites

the stock main jet on your bike is a 142.5 and should work fine with the fmf pipe.

most on this board prefer to use the much more complete james dean jds005 jet kit.if you can return the kit you'd be better off imho.but the dynojet kit will work.

Share this post


Link to post
Share on other sites

what all comes in this jds005 kit and i appreciate all the info you are giving me bumtarder Im pretty stupid when it comes to this stuff

Share this post


Link to post
Share on other sites

it's complete with all the main jets you'll ever need for the mikuni as well as 2 adjustable needles,a 25 pilot jet,s/s socket head float bowl screws,drill bit and screw for removing the fuel screw plug etc.and great instructions.it's the one most use on the stock mikuni until you go for the upgrade to the 39 fcr-mx carb.

read thru the master 3x3 thread in the drz faq forum at the top of the page to get caught up.there's a ton of excellent reading in there for the new guys.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0