Sign in to follow this  
Followers 0
Jeff_Steckline

07 Wr 450 sub frame.

10 posts in this topic

I have worn threw my sub frame, from boot rub. I am now a believer in frame guards. Does anyone know if I can use a 07 YZ sub frame? Please, any cheap suggestions. I was going to shop eBay. Thanks. Jeff S

Share this post


Link to post
Share on other sites

Call me I know the cure and no you don't want to run frame guards that only makes it wear out faster.

Share this post


Link to post
Share on other sites
Call me I know the cure and no you don't want to run frame guards that only makes it wear out faster.

Mike, I'll give you a call. Explain for the greater good why we don't want to run frame guards? Thanks bro... Jeff S

Share this post


Link to post
Share on other sites

YZ subframe will not work...

I lucked out and found one on e-bay for $35 when I needed to replace....

cant you just cut and splice in some Alum. square stock?

I am curious bout the frame guards too....

Share this post


Link to post
Share on other sites

can you please describe what you mean by "wearing through the subframe"

Have you actually worn a hole through it???

My WR is 6000 k's old and the subframe is fine.....

Share this post


Link to post
Share on other sites
can you please describe what you mean by "wearing through the subframe"

Have you actually worn a hole through it???

My WR is 6000 k's old and the subframe is fine.....

Right where the ankle on my boot (Sidi boots ) meets the subframe, I have worn threw the sides of the subframe on the outside edges. The cracks are about 1/2" long and run vertically up the subframe.

Don, thanks for the info on the YZ subframe. I thought I read somewhere you could swap out the WR for the YZ but couldn't recall if It was real or just dreamed up.

Share this post


Link to post
Share on other sites

I noticed I was wearing through the sub frame, and even rubbing on the frame.

I bought some of the GYTR aluminium frame guard and no longer have a problem.

Theres no reason why you could'nt cut out the damaged section of sub frame and weld in some new box section.

Share this post


Link to post
Share on other sites
I noticed I was wearing through the sub frame, and even rubbing on the frame.

I bought some of the GYTR aluminium frame guard and no longer have a problem.

Theres no reason why you could'nt cut out the damaged section of sub frame and weld in some new box section.

Where did you find the frame guards? I've been looking online and have only found some carbon fiber ones from light speed. Thanks:bonk:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0