Has anyone had a problem with the stock 05 YZ needle being too lean in a 2005ish model WR? I bought the stock 05 YZ needle for my 2005 WR a while back. I cleaned the carb well and I now have the needle one notch from the last and its still a little too lean. The inside AND outside of the carb and all parts in the carb(ACV and AP parts) are spotless. The jetting should be dead-on and I've got the leak jet plugged. It still has a little miss at the first part of the needle circuit. Not all the time but when it does it sucks. Help me.