07 YZf450 Oil pump removal

im overhauling a 07 yzf450 that had a lower rod bearing blow, in turn clocking the oil pump with shavings and destroying it.. my problem is it looks like the outer "Rotor" on the pump is pressed into the right case, if so how do i remove it?

It's not pressed in. It sits in the bore in the case and should turn freely. It is probably jammed with debris from the incident. Try rocking/prying it out of place with something like a large pair of snap-ring pliers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now