'04 valve specs same as '08?

Anyone know the valve cleanrance specs for the '08 450 engine? I know there was a slight cc difference with the quads of 04-05, not sure if the bikes were the same also (439cc I believe). I have a friends service manual from his '04 model, and wanted to make sure the specs and shim chart were the same......before digging into mine.

Cold valve clearance

-intake 0.10-.015mm (0.0039-0.0059in)

-exhaust 0.20-0.25mm (0.0079-0.0098)

TIA

The specs are the same, but the engine has been a 449 since '05 or '06.

Where's your manual?

Also, this is a quad. You need to take this over to ATVTalk.com, TT's four wheeled site.

The specs are the same, but the engine has been a 449 since '05 or '06.

Where's your manual?

Also, this is a quad. You need to take this over to ATVTalk.com, TT's four wheeled site.

Not arguing with that, but its the same motor.......and I figured I'd get a quicker reply over here, since ATVTalk is in its initial stage. :bonk:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now