valve adjustment video?

i know valva adjustments have been covered. lots. but. i got ready to check the valves today, rads off etc. got the feeler gauge and generally jacked around.

the directions (from here) just don't seem to be clicking with me, dont realy want to get in their and mess anything up. so. are the ebay valve adjustment videos any good? helpfull

checked out ktm talk and came across a video on youtube. just search youtube with "ktm rfs valve adjustment"

hardest part for me is finding the TDC

good luck

free video is out there like he said.

Here is a link to Travis valve adj video.

I tryed it with the valve feeler gauge I purchased from my KTM dealer Travis way works better for me with out the feeler gauge.

checked out ktm talk and came across a video on youtube. just search youtube with "ktm rfs valve adjustment"

hardest part for me is finding the TDC

good luck

Thats why I did the video. To show you don't need to find TDC to adjust the valves

Like I said before time before last I tryed to adj my valves with a feeler gauge they end up to have to much gap in them the bike did not want to start when cold with the E-Starter and I notice it would load up when running at low RPM's I was MX the bike at the time I notice this happens in tight slow corners.

When I readjusted The valves with out the feeler gauge Travis way the bike starts easyer and with the E-Stater when cold and no loading up so far I have not MX the bike yet It mostly Wide open Desert type riding.

Oh yea Travis Many thanks for all you're Video's you have put out made made my life much easyer.

Travis D-37..........Many thanks for your videos. Being fairly new to the KTM world, your vids have been a tremendous help. :worthy:

Does anybody know if there is the same video but for the xc4 motor?

Does anybody know if there is the same video but for the xc4 motor?

We are working on it.

We are working on it.

Don't forget to say do do. :thumbsup:

We are working on it.

Nice! Im over paying $100 for my local KTM to check the valves, probably doesnt take them long and its an easy buck for them:bonk:

Will the method Travis shows work if I have a Rekluse auto clutch?

Will the method Travis shows work if I have a Rekluse auto clutch?

It the auto clutch doesn't allow you to turn the motor with the rear wheel. you can pull th igniton cover and turn the motor over with the flywheel nut just as easy. and at worst you will have to buy a ign gasket

Thanks Travis. Excellent video BTW.

after watching the vid I'm going to try it myself for the first time. but i suffer from CRS (can't remember sh*t). so which should i do? move my computer to the garage, or do the valve adjustment in my living room?:thumbsup:

is there a video for this for the rc4 (250f) motor too?

after watching the vid I'm going to try it myself for the first time. but i suffer from CRS (can't remember sh*t). so which should i do? move my computer to the garage, or do the valve adjustment in my living room?:thumbsup:

Bring the bike in to the livingroom. Its cold out in the shop.:moon:

im trying to adjust my valves right now, i have researched and have both videos and the manual and still cant find the right blace to be (tdc or just pass or in the overlap or whatever) Either my feelr gauges are lying to me or i just really suck!!!... i cant even get .002 feeler in between any of them!! must have watched the travis video ten times today!!! thank you for that btw...... someone give me some pointers im losing my mind!!! :moon::thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now