HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
Martys

Videos may help you with the bad economy.

2 posts in this topic

Has this economy changed how you maintain your bike because you can't afford to take you bike to the shop? If you're interested in learning how to work on your bike and would like some guidance then the Motopower Videos may save you some money and time.

Over the last few years Motopower has been making how-to videos on bike maintenance and upgrades. The ideas for the videos came from our friends at TT. The DVD's are designed for those of you who prefer watching a video rather than reading a manual.

We’ve got a small library of stuff available now. You can get to our website by clicking here: http://motopowervideo.com

Below is a summary and pics from some of the DVD's.

Carb DVD - Shows how to tune a carb (adjust the float, jetting, air screw, fuel screw, and needle)

carb3.jpg

Basic Maintenance - Shows how to do the stuff you need to do regularly - oil, air, chain, sprockets, brakes... and more

chain_removal.JPG

Bike Setup DVD - too much to list! please go to the website.

bike_setup2.jpg

Valve maintenance - Shows how to find Top Dead Center and check/adjust the valves.

suz_valve_4.JPG

Fork Maintenance - shows how to pull the forks, shows how the clickers and piston/valve operate, change the oil and seals (including Synergy seals ) and then reinstall the forks.

ktmfork3.jpg

Shock maintenance DVD - Shows how to pull the shock, shows how the clickers and piston/valve operate, change the oil and seals and then reinstall the shock.

SYZ25001d_4.jpg

Clutch maintenance Video: shows how to diagnose clutch problems, inspect plates, replace bad parts and install a Rekluse Z-start with a LHRB.

clutch2.jpg

Top End - replace piston & rings, inspect parts (including the head and valves on 4 strokes)

TYZ4504.jpg

Bearing Replacement - Inspect, lube and replace wheel bearings and swing arm bearings.

WheelBearings2.jpg

If we don't have what you're looking for then please drop us a note or respond to this thread.

Thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0