Jump to content

YZ450 Water Pump


Recommended Posts

Its a pretty easy process....

The right side crank case needs to come off then you can replace the seals, the bearing, and the water pump shaft....

I would make sure you change everything since you are down there. I made the mistake of just replacing the seals and not the shaft and bearing and about 6 months later, the water pump started to leak again...

If you go thru the Thumpertalk OEM store, it should not cost you more that $75 (the impellor may add another $40)

Make sure you look thru the service manuel (if you have one), it shows the entire process very well.

Good Luck!!!!

Patrick M.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...