Husky WR430 1987

Can anybody help me with a few tech questions

what is the cylinder head torque spec and how do i set the ignition timing??:thumbsup::p:cry:

Can anybody help me with a few tech questions

what is the cylinder head torque spec and how do i set the ignition timing??:thumbsup::p:cry:

I can get you the head torque spec when I get home tonight. I should have it listed in my svc manual. No comment on the ignition timing though.

Anyone know where to get new top end parts at a good price on this bike?? Sorry to hijack. :p

Dang, I'll remind myself again to check... sorry...

Ok, here ya go:

On the head, on the outer 4 corners, those are at 29ft lbs. The ones in between, in the middle sections, are 25 ft lbs + loctite 222.

Hope this helps out...

got the pin for the flywheel? get TDC then back off the set amount and the pin goes into the flywheel and stator. then lock down the stator. i think 1.2mm thats from memory...thats old. havent set that in 20 years..

Thanks for the quick response

my be im wrong my head has only 4 nuts and the timing rotor has no keyway its just a taper

maybe its a CR not a WR :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now