YZ front numberplate on 06 WR ?

How hard is it to put on? do it bolt on using stock wr brackets? will it clear all the junk behind it?

How hard is it to put on? do it bolt on using stock wr brackets? will it clear all the junk behind it?

it can be done...if you remove all the crap is should bolt right up if you leave the trip computer then its gonna look kinda bulky but no one will notice unless they are right up on it

I had a plate laying around from a kx85. I tried it out, and it looked gay as hell. The computer on my 06 sticks out so far that there was a huge gap behind the plate, and it sort of looked like the plate was hanging out over the fender. I pulled it off before anyone could see. :thumbsup:

This is probably too late but here is a picture of mine. I left the ignition switch/trip meter and fabbed some little brackets to hold the top of the number plate to clear that stuff.

DCP_0956WZ450F.jpg

In this picture, you can see how my numberplate stands up a little more vertical than the one on my son's YZ.

DCP_0975Allourbikes.jpg

Thanks, I can see the difference, it's noticible but still ok :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now