supermoto wr?

Who has there wr supermoto . I am doing mine. What size are you guys running for rims. pictures would be cool.

thanks

I did my 07 450 . I'm running 17's 3.5 up front and a 5 in the rear. I'll post some pics in the morning , if you see one on here that has a fmf graphics kit and a rack it's mine most likely.

3.5 Front-5.0 Rear

wr2.jpg

rearwr.jpg

thats a nice bike. that is what u want mine to look like.

Hello from Finland!

I just finished my WR400 supermoto

It feels great to drive

3,5x17 front and 5,0x17 rear fits fine.

100_1517.jpg

What about chain clearance on the 5" rim.

Mine is too close on a 5" Exell ,cush drive Talon hub so i bought a non o-ring chain....better. The 4.25" rim seems to be a better size.....

Here's my 02 426. I'm running 3" front, 4" rear 17s with 110/70 front and 150/70 rear tyres. I have just enough chain clearance (ie a 160 tyre would hit) however my rear rim is not offset at all.

DSC05237_small.jpg

here you go I just shot a walk around . feel free to ask questions

DSC00946.jpg

DSC00948.jpg

DSC00949.jpg

DSC00950.jpg

DSC00951.jpg

DSC00952.jpg

DSC00953.jpg

DSC00954.jpg

DSC00956.jpg

DSC00958.jpg

DSC00959.jpg

DSC00960.jpg

DSC00961.jpg

DSC00947.jpg

DSC00957.jpg

just a quick question guys wot sprockets you runnin?

Here's my 02 426. I'm running 3" front, 4" rear 17s with 110/70 front and 150/70 rear tyres. I have just enough chain clearance (ie a 160 tyre would hit) however my rear rim is not offset at all.

DSC05237_small.jpg

I've thought of doing that to my 02. How much $$ do you have invested?

I've thought of doing that to my 02. How much $$ do you have invested?

Hi, thanks for the interest. If you have a look in my garage, I've got all the prices of my mods listed, they're reasonably accurate. Basically I bought the bike for NZ$4800 and spent about NZ$2000 on the supermotard conversion. What I haven't listed yet is the Vortex X-10 ignition I ordered for it a week ago which cost me another NZ$615 (the original CDI shat itself). I don't plan on getting my money back on the bike, if I ever sell it that is :eek:.

very nice bikes. you guys have what i want to put together. has any one tried the warp 9 rims. i can get them for like 880 with a front 320mm rotor and a rear sproket. What is everyone running for sproket size?

i have already ordered the baja light kit with mini led blinkers upgrade and

vapor computer.

next is the rims and tires.

here you go I just shot a walk around . feel free to ask questions

DSC00946.jpg

DSC00948.jpg

DSC00949.jpg

DSC00950.jpg

DSC00951.jpg

DSC00952.jpg

DSC00953.jpg

DSC00954.jpg

DSC00956.jpg

DSC00958.jpg

DSC00959.jpg

DSC00960.jpg

DSC00961.jpg

DSC00947.jpg

DSC00957.jpg

WOW Tweav!!...we're not worthy!...sweet ride.. where did you get your rack?

How much shorter is the bike, with the sm rims...can a 2"-3" height drop be achieved with the supermoto conversion?

How much shorter is the bike, with the sm rims...can a 2"-3" height drop be achieved with the supermoto conversion?

you can count on at least a 2 inch drop . I'll snap a pic side by side of my wr450 sm and my crf250x dirt if you'd like . I can only touch one foot at a time on the crf , and I touch nearly flat footed on the wr .

WOW Tweav!!...we're not worthy!...sweet ride.. where did you get your rack?

the rack is from promoto billet.

twaev, that sounds like an idea. whenever ur ready with the pic..

twaev, that sounds like an idea. whenever ur ready with the pic..

ok here you go

DSC00965.jpg

DSC00964.jpg

DSC00962.jpg

this should give you a rough Idea

Hi, thanks for the interest. If you have a look in my garage, I've got all the prices of my mods listed, they're reasonably accurate. Basically I bought the bike for NZ$4800 and spent about NZ$2000 on the supermotard conversion. What I haven't listed yet is the Vortex X-10 ignition I ordered for it a week ago which cost me another NZ$615 (the original CDI shat itself). I don't plan on getting my money back on the bike, if I ever sell it that is :rolleyes:.

Cool thanks! :thumbsup: Are those wheel more or less then spoke type wheels?

just a quick question guys wot sprockets you runnin?

14/36 for fun most of the time

15/36 for lots of road work , longest 1st gear ever ,

make sure you get a 4.25 inch rear wheel dont go for a five inch.

and yes your bike will drop loads with 17 inch wheels dude.

I have a 5 inch rim and ,I also think the 5 inch rim is too hard to get lined up right. so a 4.5 or a 4.25 would be better , Don't get a 5 inch unless you are ready to do a bit of machining spacers to make it fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now