Question about a PC T4 Slip-on YZ426F

I feel stupid asking this, but here we go. Just got my T4 slip on exhaust for my 2001 YZ426F. My question is about the clamp between the header pipe and the tailpipe. Is it needed on this? I assume not since its a smaller diameter, but i thought i might as well ask. Thanks..

If the mid pipe is slotted at the front where it slips over the header, it needs a clamp. If it is not slotted, no clamp is used.

It would not very likely use the OEM clamp, either, and if no other clamp was supplied, odds are you don't use one.

I feel stupid asking this, but here we go. Just got my T4 slip on exhaust for my 2001 YZ426F. My question is about the clamp between the header pipe and the tailpipe. Is it needed on this? I assume not since its a smaller diameter, but i thought i might as well ask. Thanks..

No clamp, it "slips on"

Thanks..that's what I thought. Just wanted to make sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now