YZFing my '08 WR450

I want to get rid of the head light and tail light on my '08 WR450. I also want to change all of the plastic to black. But I do want to keep the computer. What is everyone using? inquiring minds want to know....:thumbsup:

I am very very new at this but I believe the shrouds are different. However if you get an IMS fuel tank then you can use yz shrouds. Acerbis also sells the plastic kits for about 125 bucks. You can get either blue or white for the WR.

Im pretty sure you could just yank the headlight and use a regular old number plate up front. not sure on the fenders

I am very very new at this but I believe the shrouds are different. However if you get an IMS fuel tank then you can use yz shrouds. Acerbis also sells the plastic kits for about 125 bucks. You can get either blue or white for the WR.

Im pretty sure you could just yank the headlight and use a regular old number plate up front. not sure on the fenders

What about the computer? does the computer fit under the front plate?

I want to get rid of the head light and tail light on my '08 WR450. I also want to change all of the plastic to black. But I do want to keep the computer. What is everyone using? inquiring minds want to know....:thumbsup:

I'm 98.9% the '07 and '08 are the same. I've written up a bit on this "conversion" but I did not keep my computer. Check http://www.thumpertalk.com/forum/showthread.php?p=6173317#post6173317

IMHO I don't think a YZ number plate could fit properly when keeping the computer. The computer would overhang the number plate and the cabling would be a real mess.

My $0.02!

Hope it helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now