Sign in to follow this  
Followers 0
netzzwerg

426 cam sprockets marks wrong?

3 posts in this topic

Helo,

i just wanted to reassamble my WR426 Motor, but I noticed, that maybe the marks on the cam sprockets are wrong. I put the cams into the right position but as you can see on the picture the exhaust cam is directed a bit upward. Is this right? If not, how far can i turn the Cam clockwise to get a good timing? Maybe the one of the YZ ?

Regards

thanks

marks on the cam sprockets dircted wright:

http://www.manfredkessler.de/ebay/25032008251.jpg

but cams directed wrong:

http://www.manfredkessler.de/ebay/25032008256.jpg

Share this post


Link to post
Share on other sites

I may be wrong, but your INTAKE looks like it is off by one tooth and pointing slighty up. Rotate that sucker one tooth clockwise and then it should be right. That will give you 13 pins between marks which is what you should have on the wr.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0