Sign in to follow this  
Followers 0
morrpete

Removing the turn signal control

5 posts in this topic

I have a 95 xr650l. I've stripped the turn signals off and want to remove the control on the H/B. Any idea how to rewire so the headlight and clutch still work?

Share this post


Link to post
Share on other sites

Remove the control.

Jumper the bike side of the connector so the low (or high) beam is on. you will also need to jumper the safety circuit so the starter will work.

If the clutch perch is part of the control then get a regular perch. One for a XR600 should work.

Share this post


Link to post
Share on other sites
Wont that kill his battery.He will need a switch some wear for the head light.

I thought that was in the key switch, not the left hand turn, hi/lo, horn switch. All this would do is permanently select high or low beam and do away with the trun signals and the horn.

Share this post


Link to post
Share on other sites
I thought that was in the key switch, not the left hand turn, hi/lo, horn switch. All this would do is permanently select high or low beam and do away with the trun signals and the horn.

Your right, my bad. Been a while since the L, forgot all about a keyed ign

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0