wr450f-07 stock springs

Hello wr owners!

Im about to buy a wr450f-07, coming from a yz250f-06..

If i look in manual it says

fork:0,459 kg/mm, shock 5,5 kg/mm

Race tech says

fork:0,460 kg/mm, shock 5,3 kg/mm

Mx-tech says

fork:0,460 kg/mm, shock 5,3 kg/mm

Eibach says

fork:0,470 kg/mm, shock 5,0 kg/mm

who is right?

A do recall someone measured the stock spring but can not find the post..

What springs would be right for me 90kg (200lb) without gear.

Fork and shock is stock -not revalved.

thanks Henric

I could never get a straight answer on this ether . I also weigh 200 and have a 07 wr450f . I put on the stock rear spring from a 06 Yz 450f because I got them cheap and it feels better . but just it is still bit soft. but not bad in the woods . just no big jumps abit too soft of that , but that is not what this bike is for anyway.

What springs would be right for me 90kg (200lb) without gear.

Forks=.48 Springs

Shock=5.8 Spring

Springs tend to run in even numbers and you should go up to the next highest if you hit a recommendation that gives you an odd figure, hence .48 and 5.8...SC

Springs tend to run in even numbers and you should go up to the next highest if you hit a recommendation that gives you an odd figure, hence .48 and 5.8...SC

will different valving affect the recomended spring rate?

ie, more compression damping + lighter spring

It can, that is why RaceTech's recommendations are notoriously light. They factor in adding their valving...SC

Does by the way the springs from a wr450f-07 fits in a yz250f-06 fork?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now