Oil leak out of decompression toggle thingy on '98 yz400f

I have a drip of oil coming out of where the decompression lever thingy goes into the engine block. I cant find the part number for the bushing/ washer plug that needs replacement.

ANy help here?

THanks as always

93102-12224-00 OIL SEAL

Be very gentle when tightening the screw in the side of the cylinder head that holds the decompression assy in place. The threads can be easily stripped.

93102-12224-00 OIL SEAL

Be very gentle when tightening the screw in the side of the cylinder head that holds the decompression assy in place. The threads can be easily stripped.

.

If so happens this is stripped out (witch in my case it is) what can be done to fix this?

You will need to re-thread the hole using a Heli-Coil.  The original bolt or a replacement must be used, as it has a pin on the nose of the bolt that retains the shaft.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now