Anyone Use The Quickshots?

Just wondering how many out there are running the quickshots on your carb? I see Boyesen makes two versions and the first one is quite a bit cheaper than the new one now, are they that much better? Thinking of putting one on my 08. Any info helps. Thanks!!:cool:

I just picked one up on Ebay, I hope they work.

Try not to be too disappointed.

I felt a huge difference with the throttle response especially off idle, eliminated the ridiculous amount of bog. :cool:

that was with the quickshot 2 by the way

happy with mine so far, no more stalling when engine is hot.

I have one ...it only addresses part of the issue....

I bought it when they first came out and everyone raved about it....for the what they cost a better solution for just about the same amt of cash is the ZipTy Carb mod...it fixes the issue once and for all.:cool:

I just picked one up on Ebay, I hope they work.

I tried one on my 06 and 08.......they are garbage!!!!! If you wan't one that bad.....send me a stock cover and i'll give you one free....plus shipping. In my opinion they are a bad deal even for free.

I felt a huge difference with the throttle response especially off idle, eliminated the ridiculous amount of bog. :cool:

The o-ring mod or wiring the acc. pump works the best.

The o-ring mod or wiring the acc. pump works the best.

how do you do either of these?

how do you do either of these?

Do a search in the jetting forum. They show you both ways to do it.

Ok I looked I cant find either of these mods. Can someone post the link?

don't know the link but simply put you take off the throttle body plastic cover on the right side. There is a black plastic arm attached to the throttle cam (all one piece). It touches the accelarator pump adjustment screw. Take a small heavy oring and loop it over the two so they are connected together, or wire tie them. Has the same effect as putting in a heavier duty spring only way easier to do. Creates more of an instantaneous response between your twist of the throttle and the acc. pump - minimizes the hesitation. Cheap and easy to do and makes a big difference I think (never did mine just on it's own, did other mods as well so hard to say). Makes sense that it should help. Also I did use the quick shot 2 and thought it was very helpful. Don't know why but it really lessened the backfiring snap crackle pop on decel as well which was really bad stock. I found after the qs2 I could hold 3rd in corners easier and much more instant throttle response. I now use the r and d power bowl on my ktm and it is great. Who needs fuel injection when you have a finely tuned carb.

Try not to be too disappointed.

I decided to give it to a buddy for his b-day, I don't need one.

Anyone running the powerbowls on their yzf's? or is that just a good fix for the ktm's which don't have a leak jet. Makes a big difference on the ktm going from no leakjet to a fully adjustable one and with the jd jetting kit plus oring mod it is very very crisp and responsive. Getting back on my yzf now it feels a bit slow to respond when I used to think it was crisp. Just wondering if anyone has one on a 07-08 yzf 450 and what they thought.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now