2008 Front brake FYI

I was going to put my ASV lever off of the 06 on the 08 and discovered the master cyclinder is different and it would not work. Anyway in the process I removed the "pin" the the lever rides on. MAKE SURE YOU PUT IT BACK IN CORRECTLY. I put mine in backwards (the radius on the ends is different), and it made my front brake drag and lock up. Switched it per the manual and all is well now.

good info:eek:

The correct lever for the '08 is the same one that fits the '07-'08 YZ250F. The ASV PN is BLH13. The '08 uses the new smaller master cylinder.

Cool I thought the 250 f was the same as the 08 450's!

:banghead:

Just the brake side is same as 07-08 250f but clutch side is same as 06-08 is this correct?

Just the brake side is same as 07-08 250f but clutch side is same as 06-08 is this correct?
Exactly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now