Sign in to follow this  
Followers 0
graazzy

2003 wr450f clutch question

4 posts in this topic

When i pulled the clutch plates out to look for notches on the clutch basket fingers,i found two spacer rings that are not mentioned in the workshop manual.They were sitting against the inside face of the basket,one is dish shaped with the words "out side" stamped on it ,The other shaped flat.does anyone no about these, can i leave them out?:banghead:

Share this post


Link to post
Share on other sites

No need to leave them out.

They are called -clutch damper spring and seat plate. You need to recheck your manual or check the 426 manual for there location. In my 426 manual it shows they are fitted first upon reassembly, before any clutch plates are fitted.

Have fun

Share this post


Link to post
Share on other sites

thank you i did reassemble them as you said,may be the previous owner has fitted a 426 clutch.

Share this post


Link to post
Share on other sites
thank you i did reassemble them as you said,may be the previous owner has fitted a 426 clutch.

Yeah, I don't remeber those on my 04' and I had that clutch apart several times:excuseme:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0