07 wr450 Scotts Sub Mount/bars?

Anybody put a Scotts Stabilizer Sub mount with tall bars(ie Pastrtana fmx high bend) Is their enough cable to do it?

There wasn't enough cable to do just the SUB mount on my '05. I'd bet it's the same with yours...SC

Run the throtle cable tank side of the bars and you should be right. I have the BRP sub mount, same as scotts, with stock bars and no drama's

I also have the sub mount BRP/Scotts with stock bars and have no issues BUT I just bought a set of woods Hi bend and was wondering the same thing.

My buddy just mounted up a BRP submount set on his 07' YZ and he has the Pastrana / ATV Race bar and he did not have to do anything with his cables:thumbsup:

There wasn't enough cable to do just the SUB mount on my '05. I'd bet it's the same with yours...SC

I had to move the perch about half an inch to the right. Otherwise no issues with the stock bar and cable. I doubt the stock cable will work with the Pastrana MX bar though as the sub mount raises the bar 1" and then the Pastrana bar some more.

More here: http://www.thumpertalk.com/forum/showthread.php?t=494813

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now