Unbolt the front number plate, low on the right side mounted with a rubber insulator, it's a little square box with 2 wires going to it. Right on, thanks, found it with your help! This new one is way bigger, and I'm not sure how I'll mount it back in there, but I'll figure that part out. I also pulled the signal indicator bulb out of the cluster. However, now, for some reason, when I hit the blinker, only three of the LEDs in each blinker illuminate, and they don't blink. What's going on now. At least the correct side comes on again, but they don't fully illuminate, and they don't blink. I thought this thing was supposed to solve that. Anyone now?